Well and borehole water Pumps
Your well or bore pump is core to your system, and depending on the purpose for your water extraction, should'nt be compromised. Very cheap pumps may be bought on the internet from the Far East and some of them are actually quite good, but replacement parts aren't available and after sales service is at best difficult, and at worst non-existent. So before you all go rushing out to learn Mandarin and Kung-Fu consider this:
We stock only world leaders in pump design including Grundfos, considered by many to be the Rolls-Royce of pumps, and DAB who build pumps for all scenarios and all budgets. They are well very represented here in the UK, and always stock parts, spare wet end and spare impellor ends, motors and controllers etc.
These companies have many years of experience in the design, manufacture and after sales service of pumps and pump systems and therefore we would advise you not to be tempted with bargain basement pump systems, because nobody knows how to fix them, and nobody wants to spend hours on the phone to the other side of the world, trying to explain your problems to someone who can't understand you.
South Coast Water are also the European supplier for the infamous Australian Brumby pump system. This unusual pump is unique in that it there are virtually no moving parts down your well or bore and is instead powered by air from a compressor sited above ground.
The Brumby pump has many distinct advantages over conventional designs. A full appraisal of the Brumby pump may be viewed here.
|
 |
 |
 |
 |
 |
|
 |
 |
 |
|
 |
 |
 |
|
|
|
 |
 |
 |
South Coast Water stock the full range of Grundfos and DAB well, bore and sump pumps plus many other brands, along with filtration systems, UV-systems and all associated equipment and consumables.
Once we know the flow rate test report and the ultimate purpose for your well or bore we will be able to advise you of the best type of pump for your project.
Sometimes, a simple DAB pump will be all that is required - for example, in a shallow well where demand is low and output is not critical.
Other scenarios may require a more robust and heavier duty stainless steel pump - say for a situation where your bore or well is deep and you need to lift high volumes quickly, or where you are drawing water for commercial use, or in any situation where your demand is critical.
Many of the pumps which we sell include some sophisticaed electronic features such as dry run protection, which stops the pump in the event of the bore or well running dry to prevent over-heating and damage. Automatic restart, which as the name suggests, restarts the pump again when water is detected. Water pressure operated switches, which starts a pump on demand as water pressure in your system drops due to flow, and stops the pump automatically when flow ceases and pressure increases.
|
 |
Have a Question?
Click Me or use our contact form, or call us on: 023 92 592 319 |
|
|