Installing your pumps,pipework and filtration

First of all we would install a pump into your water well or water borehole, this will allow us to conduct a water flow rate test to help us understand the quantity of water will are able to abstract and will also allow us to collect the water for a water analysis test.

Once we have this information we are the able to proceed with the correct filtration. This is usually a sediment filter to help catch large particles and then an ultra violet filter which kills most known water bourne bacteria.

We use a plastic polypipe which is either black (non drinking water) or blue (potable drinking water) and connect this to your tank if you require one along with connection to your filter system.

We are able to connect onto your existing pipework with very little disruption. this is carried out by a quilified plumber.

If you so wish we can install taps into your garden area or where ever you so wish, this can be very helpful for irrigation and if you are wanting a complete irrigation system we can assist with this also.

Once all pipework is complete and fully inspected we will install insulation dependant on the location of the pipework or if you wish for us to do so, this will help stop water within the pipework from freezing in the winter time.

commisioning

This is carried out by our fully qualified plumber if it is connected within your existing pipework, someone will also inspect all pipework connections, test electrical connections and ensure all pumps and filtration are running to correct specifications.