slide show

Discover the benefits of a private water supply Today!
Find your water

If you dont already have a known water supply, then your first job will be to find it. Dowsing and geological surveys provide the most accurate means to do this.. Read more...

Pump it up

Once you have found your water supply, the next task is to bring it to the surface, establish your yield, and have it tested to establish its chemistry.
Read more...

Filter it

When you have the results of your composition test, you will need to think about filtration. The type you may need depands on your water content.
Read more...


The Brumby pump range and controler


Brumby manufacture 3 types of pumps plus a timer controller which is necessary in some situations.

As with all pumps, there is a maximum lift which any given pump can do.
You don’t need to concern yourself with the science as it can be complex -
We will calculate the Brumby Pump you need

With some basic information from you, your bore or well depth, the depth of typical standing water and the amount of lift that will be required, i.e., how high the water must be lifted before it exits the delivery pipe.

South Coast Water is proud to be the European distributors for the Brumby Pump and more details can be found on our sister site www.brumbypumps.co.uk

As with all items within this Brumby Pump section, we can advise you of the most suitable Brumby Pump for your needs. Please contact us to discuss, or call our FREE phone number above.

Brumby Pump S1

The S1 Brumby pump

Is designed to fit into a standard 100mm (4 inch) or larger well/bore casings.
The pump requires a submersion to lift ratio of over 1/3.
That means if you have a well/bore that's 90ft deep, you need at least 30ft of water in the bottom to flow to the top.

Brumby Pump S1

The S2 Brumby Pump

Has 2 valves and can be used with or without controller in low flow situations - up to 150 galons, 680 litres per hour.
Designed to go into 100mm (4 inch) or larger well/bore casings, where low flow is ok and substantial savings on delivery cost can be made due to the pump's smaller size than the L2.

Brumby Pump S1

The L2 Brumby Pump

Is 2.2 Meters (7 1/2ft) long and designed to operate in shallow water, high lift situations, usually with a controller.
It will deliver more than the S2 with a controller, and in deep submersion - low lift situation will delver substancially more. Designed to fit into 100mm (4 inch) or larger casings.

Brumpy Controler

Brumby Pump Controller

Controllers for shallow submision and high lift are curretly being redesigned and will be available soon.

Two new and improved versions are coming shortly

NOTE: Controllers are ONLY required where water is shallow and lift is high, as explained above.

A controller can easily be added later if required.

 

FAQs Have a Question?
Click Me or use our contact form, or call us on: 023 92 592 319